What Reddit owners say about each, side by side — scores, recurring themes and the most-upvoted complaints.
Bambu LabBambu Lab A1 miniReddit score
96% positive · 505 opinions
Bambu LabBambu Lab P2SReddit score
97% positive · 171 opinions
In short
Head to head
Reddit score
Positive share, discounted when few people weigh in
Too close to call
Positive sentiment
Share of opinions that are positive
Too close to call
Opinions
Mentions that take a side — the evidence behind the score
Mentions
Every relevant Reddit post and comment
Themes
How often each topic comes up, coloured by how owners feel about it.
Ease of Use
Value
Reliability
Print Quality
Upgrades
Build Volume
AMS Lite
AMS Combo
Summary
The Bambu Lab A1 mini is the default beginner recommendation in nearly every thread. Owners describe it as so plug and play and frustration free and say the A1 mini just prints, with auto bed leveling and calibration removing most of the fiddling older printers needed. People coming from Enders say it runs circles around any ender model, and even a 7-year-old or a non-technical roommate can print with it. Several note it is SO QUIET that it can run in a bedroom.
The Bambu Lab P2S is widely recommended as a massive upgrade over the P1S, with owners pointing to the touch screen, 30 fps camera, and quick swap nozzles along with automatic calibration and better airflow; one owner says nozzle swaps take under 30 seconds. Many now consider the X1C redundant: It's the X1C but better and cheaper. Ease of use is the single most common compliment. First-time buyers say it is more plug and play than any paper printer, and people coming from tinkering-heavy machines say i can send something to print and it actually prints.
Owners' words
The most-upvoted Reddit comments about each model.
Bambu Lab A1 mini
The issue really is that those micro sds really arent meant to be put in a hot environment and then written to 24/7. I still have a 2gb sd from one of my first printers no issues, meanwhile with video recording enabled in an A1 mini ive lost 3 micro sds within half a year. Disabled video recording and the fourth run is running no issues so far.
Feature for feature wise, not really. BUT. I've come to appreciate small stuff of QoL. I was talking with a friend that bought an A1 mini. He has a lot less fussing when he had to setup vs me, that i had to do first layer calibration per plate and stuff. But, there are some stuff that i fould useful that the a1 doesn't have. like the mini+ is actually less noisy. There's a high pitched fan noise from the electronics fan, that ppl are trying to mod out. He can only reach support chat certain hours of the day. He has a replacement fan out coming for almost 2 months, and still nothing, and support can't really tell him anything. Its somewhere in limbo. The mini+ has checks to see if the loaded filament is matching with the material type that the gcode to be printed. The a1 doesn't have it (at least he wasn't able to find such a check) if you don't use the AMS. And that thing saved me a couple of times. Max temp of heatbed. The mini+ goes 100c, the a1 goes 80c. So check your materials. I love love love using ColorFabbs PETG-HT. Its tough, its glass transition temp is 100c (which where i live is damn useful), but it needs a bed of a minimum 100c. So its a no go on the a1. So check the materials you'd want to use. The mini+ is now actually fast. I'm actually still amazed with how it moves now with the updates since i had it way before input shaping was introduced. And updates are still happening 5 years down the line. Though, to be honest, a Revo nozzle or something else that gives you a full metal hotend is a must for the mini. to get rid of that PTFE tube and get fast nozzle change. So its not really 200+ USD, its 200+100 for the Revo. Last point, is the latest bambu controvercy. Which you don't know if its going to be the last. But printer for printer, controvercy out, the a1 is a pretty great machine all things concidered.
100%, I got an A1 mini on black friday as my first printer, and I really regret not getting the regular A1 because of the print volume
Bambu Lab P2S
I got the P2S and I wish I saved to get the dual head printer to save on time and filament. You'd be able to print supports in a different type without changeover.
First off - you started this thread without adding even ONE tip yourself??? Secondly, my tip is using the handy app: it was embarrassing a long time to figure out how to tell my P2S how I swapped to a new plate: they really should have this in the settings instead of one of the printing steps itself.
I started with p2s, had extruder motor issue. Bambu sent me a part, before I could I stall it I returned it for an H2S. Now I have that and an H2D. No regerts.
Bambu Lab A1 mini
You probably won’t be angrier after updating, it won’t affect 95% of regular users. The Bambu lineup is inarguably the most user friendly, consistently successful of any 3D printer company. I’ve had some hiccups with my A1 mini but it’s all been user error, and fixing it is the most fun I’ve had in months.
I have 850 hours on A1M, no clogs, not a single failure. I got P1S two weeks ago, I had to learn how to do a cold pull after just 105 hours on P1S. A1 hotend is just better.
I don’t agree, especially for a beginner. A1 has more modern design with easier to change nozzles, way better screen, and you can see and access everything in case something goes wrong. A lot of the perceived advantages of P1S around materials you can print are also overrated for most users and I’ve had no issue getting several capable engineering materials to print even on A1 Mini. A1 also seems to be retaining its value longer than P1S so you’ll lose less if you end up needing to upgrade.
Bambu Lab P2S
If I were you I would've gotten the P2S instead of the X1C, since P2S is basically everything the X1C has but way cheaper. If you can still change it I would
If you have no idea and font feel like investing time into research, get the P2Szthe X1C is getting discontinued for a reason. There is plenty of resources online for withe one and you can compare them yourself. For the filament you are buying, the A1 or A1 Mini is enough tho.
The problem I have with Prusa is the resistance to move forward. Their products are not only expensive because they are made in the west which I could see myself supporting, but also because they refused to use traditional mass production techniques for ages, literally making parts way more expensive then they had to be. They sold plenty of i3 printers to make the parts with injection molding and never did. The time needed for printing a simple screen enclosure vs injection molding is insane. They stuck with 3d printed parts way too long. Just to maintain an image that does not matter to most 3d printing users. There are just so many factors that led to Prusa being behind the market, price is not even the main issue here, lack of innovation and improvements is. There were always cheap chinese alternatives, but now Chinese 3d printers are not cheaper, but just better. Even if the core one and P2S were the same price I would choose the P2S since it has better technology and features, the fact that it is cheaper is just a bonus.